ClearOne Beamforming Microphone Array 2

$7,499.00 Incl. GST

ClearOne’s second-generation Beamforming Mic Array is the professional-grade microphone array with beamforming and adaptive steering, ClearOne’s next-generation Acoustic Echo Cancellation and Noise Cancellation. The ultra-sleek design fits into any conferencing environment and delivers the clearest audio pickup available with its Acoustic Intelligence.

Works with ClearOne CONVERGE® Pro 2

Clear
Free standard delivery
No surcharge*

SKU: CLR-910-3200-201 Category: Brand:

ClearOne Beamforming Microphone Array 2

  • Most advanced AEC and Noise Cancellation
  • Acoustic Intelligence with adaptive steering (think of if as smart beam selection)
  • Single cable for power, audio, and control
  • Two power options- P-Link and POE
  • Can daisy-chain with Dialog 20 Wireless Microphone System
  • Can daisy-chain with all ClearOne P-link devices such USB expander and GPIO expander
  • White or Black color options
  • Works with ClearOne CONVERGE Pro 2 DSP AEC mixers

2nd-Generation Mic Array

  • Beamforming & adaptive steering technology. Think of it as smart beam selection
  • Most advanced AEC & NC
  • Acoustic Intelligence with adaptive ambience
  • Replaces 9 to 12 traditional microphones

Flexible & Scalable

  • Daisy-chain up to 3 arrays per CONVERGE® Pro 2 unit
  • Zero-consumption of CONVERGE Pro 2 analog inputs
  • Single cable for power, audio & control
  • Daisy-chain with DIALOG® 20 Wireless Mic System

Ultra-Sleek Design

  • Three mounting options – Ceiling, Wall & Table
  • Two power options: P-link, PoE
  • Standard ceiling projector mount

Configuration & Management

  • New CONVERGE Pro 2 CONSOLE software
  • Auto-discovery of devices
  • System monitoring and troubleshooting

Download ClearOne Beamforming Microphone Array 2 Datasheet


Audio

  • 24 microphones
  • 1 Channel In (does not use any input channels in CONVERGE Pro 2)
  • Number of Beams:
  • – 5 in Ceiling mode
  • – 6 in Table mode
  • Polar Pattern: Custom
  • Frequency Response: 150Hz – 16kHz, +/- 3dB
  • Dynamic Range: 150Hz – 16kHz, >70dB

LED & Touch Sensor

  • Sensor Type: 2 Capacitive Touch Button for Mute
  • LED (2x: one on each end of unit):
  • – Power On
  • – Power On & Unmuted: Blue
  • Muted: Red
  • Power Off: No light

Configuration

  • Beam enable/disable
  • Mounting mode selection:
  • – Auto
  • – Ceiling
  • – Wall
  • – Table
  • Acoustic Echo Cancellation (AEC) on/off
  • Noise Cancellation (NC) on/off
  • Filters:
  • – All Pass
  • – Low Pass
  • – High Pass
  • – Notch
  • – PEQ
  • Automatic Level Control (ALC) on/off
  • Gain adjust
  • Mute on/off
  • Auto gate/Manual gate

USB

  • For future use

P-Link Peripheral Bus

  • P-Link In & Out: Proprietary Peripheral Bus
  • Ports Type: RJ-45
  • Cable: Solid core 24AWG, factory terminated Cat 5e or Cat 6
  • Distance: Up to 200 feet
  • Sub-standard: Mode B
  • Daisy-Chain:
  • Up to 3 Beamforming Microphone Array 2 units with each supported CONVERGE Pro 2 unit in the same chain
  • Up to 3 Beamforming Microphone Array 2 units and up to 3 DIALOG 20 Wireless Receiver units with each supported CONVERGE Pro 2 unit in the same chain
  • Up to 6 Beamforming Microphone Array 2 units in the same chain with 2 supported CONVERGE Pro 2 units connected through C-Link (future software/ firmware upgrade)
  • Long Distance P-Link:
  • Increases P-Link distance from 200 Ft to 650 Ft 650 Ft (200M) maximum cable distance between any two units
  • Cat6, 550 MHz, 23 AWG, solid conductor cable Do not use Copper Clad Aluminum (CCA) cable Available only for BFM2 peripheral units
  • 48V PoE Midspan Mode B power injector for 1 BFM2 unit
  • 56V PoE Midspan Mode B power injector for 3 BFM2 units

Power Selection Switch

  • Sensor Type: Slide Switch
  • Toggle toward P-Link to power device by P-Link
  • Toggle toward PoE to power device by PoE Injector

Configuration & Administration Software

  • CONVERGE® Pro 2 CONSOLE® Software

Commands

  • Through supported CONVERGE Pro 2 unit connected through P-Link

Mounting

  • Ceiling mount kit (12″, 24″, 36″, and 48″ suspension column)
  • Wall mount kit
  • Table mount

Power & Thermal

  • Power Type: PoE
  • Port Type: RJ-45
  • Power Source: P-Link or PoE Injector
  • PoE In: PoE IEEE 802.3at
  • Power Source Indicator: Set the position of the power source to indicate the source of the power (P-Link or PoE)
  • Mains Voltage: 100-240VAC, 50/60Hz AC Power Consumption: 12W Typical DC Power Consumption: 5.26W Typical
  • Thermal: 40.95 BTU/Hr
  • Operating Temperature: 14° F/-10° C to 104° F/40° C ambient temperature

Dimension & Weight (WxHxD)

  • 30” x 1” x 5.75” (762mm x 25.4mm x 146mm)
  • Unit Weight: 4.4 lbs (2.0kg)
  • Shipping Weight: 5.7 lbs (2.59kg)

Part Numbers

  • 910-3200-201: White Beamforming Microphone Array 2
  • 910-3200-201-B: Black Beamforming Microphone Array 2

Reviews

There are no reviews yet.

Be the first to review “ClearOne Beamforming Microphone Array 2”

Your email address will not be published. Required fields are marked *

Barco ClickShare CSE-200

Free Shipping

Enjoy Free Shipping on all items delivered to Australia

No surcharge

*No surcharge on Credit or Debit Cards

Have a question?

Call us on 1300 369 829
Weekdays 7:00am to 5:00pm (AEST)

Subscribe to newsletter

Be the first to hear about our latest news, reviews, and specials
Chorus Call

Our NPS Score

X
Add to cart